Harrisville warp extender

This is my Harrisville rug loom. I don't know anyone else who weaves tapestry on one, but I would like to recommend it as a fantastic tapestry loom.

I love one feature of the Harrisville rug loom especially. The warp extender. This ingenious little addition to the countermarche loom keeps the tension even throughout the piece. The tension is superb both because it is a big floor loom with a worm gear and because of this warp extender. The warp extender allows me to raise the warp away from the warp beam as far as I need to for the piece I am going to weave.
When the warp threads are wrapped around and around a back beam, they fall in between each other and the tension in my experience is never even when you start advancing. Even if you are one of the million-stick-club and you are very meticulous about winding your warp with sticks, things can go awry easily. The warp extender pulls all the threads up evenly around a smooth steel tube. You start your tapestry with the extender raised, tie on and get everything even, and then as you weave and pull the piece forward, instead of unwinding the warp beam, you lower the extender. Genius.

And of course it is a countermarche loom and I love the fact that the warp threads get pulled evenly from either direction on each shed. I like things even. Perhaps it is a good thing for tapestry or perhaps I just have a touch of OCD.

This picture is looking from the front of the loom toward the back with the warp extender raised.

This picture is from the back of the loom looking at the raised warp and the warp beam.

Incidentally, I never warp sectionally even though both my floor looms have sectional beams. If I knew I was going to use a fairly consistent warp width on this loom, I might consider it just to get a lot of yards on at once. But I find sectional warping picky and not actually that great a method if you're looking for a very even warp. (I felt guilty about not warping sectionally for a long time--I have the spool rack and the tension box and the little counter to count yards, but I finally reached a place where I decided I could do things my own way and didn't have to listen to all the old teachers voices echoing in my head. My head is much quieter now.) I usually just put on enough warp for a couple tapestries, which, after all, are going to take many months to finish... and by the end of all that I'm probably going to want to try something different anyway.

The Great Dye Experiment of 2013, Part 2

I dye my own tapestry yarn. And I dye yarn for my students to use in my classes. And sometimes I even sell it to them. I posted a little bit a few months ago about some dye projects gone bad.
A bad dye job
and
The Great Dye Experiment of 2013, Part 1

This weekend was my first dye run in my new place... the dye studio residing in my garage now. I took some good advice from my expert dyer friend Cornelia Theimer Gardella and watched the pH of my pots much closer. I usually just dump in enough citric acid to drop the pH all the way to 3.5 and call it good. But I think sometimes that makes the dye hit too hard (and Conni was sure of it, so I decided to listen to her). So this time I used much less acid and monitored the pH. The results were excellent. Even the light colors which are always the most difficult to level turned out great.

Here are the oranges I dyed in March which were so bad.

And here are the ones I just dyed.

The first batch will be overdyed and turned into something lovely.

My biggest question for all of you out there who dye in various parts of the world is, did the water have anything to do with this difference?
The water I was using in Alamosa, CO was well water with large amounts of minerals in it and no water softener. The water I used in Velarde, NM before that was also well water but I had a water softener and had less trouble getting even dyeing than I did in Alamosa. Now I am on Santa Fe city water and I would bet there are still a lot of minerals in the water, this being NM and all, but as far as I know, there is no water softener in this house...
Does the water make a difference in how the dye takes up and how even it is? Have any of you had this experience?
(I'm using Lanaset/Sabraset acid wool dyes and dying Harrisville-milled wool.)

Not a bad days work though... nice, even, hand-dyed yarn ready for another workshop.

Color Gradation Tapestry Class in Santa Fe!

In case you missed the announcement, I am teaching Color Gradation Techniques for Tapestry May 4, 5, and 7 in my studio in Santa Fe and I still have a two open slots. The new studio is shaping up and I am excited to actually teach students in a place where I have all my supplies, books, and equipment accessible. So come and join us for a really fun class.

Here is the post with more information about the class. CLICK HERE.
We'll learn to turn a mess like this

Into something like this!

...but perhaps not in 3 days.

Santa Fe Creative Tourism post about the class is HERE.

Fiber Art Now, Spring 2013

I was happy have a very small contribution to the Spring 2013 issue of Fiber Art Now. The question was, "How does your environment impact your artistic process?"

I happened to be driving through Pueblo, CO this weekend which has a Barnes & Noble right off the freeway. I knew that Fiber Art Now was carried on the B&N newsstand and pulled over to get an extra copy. I started scanning the crafting magazines for it--you know, the spot where you find 25 knitting magazines, Handwoven, and the magazines with photos of beautiful studios and/or scrapbooks. And I didn't see it and I jumped right to the conclusion that this particular B&N didn't carry it, and then I thought, well maybe they sold out! And then I looked a little farther to my right. And there it was with the art magazines. Right where it should be.

Taos Fiber Marketplace, a brief recap

I did demonstrate at Taos Fiber Marketplace on Saturday at the Taos Convention Center. It was not a lovely day and Taos was not flooded with crowds of people enjoying the sunshine. In fact, at one point it was snowing. But I did meet many amazing people, most of whom were vendors or artists, and I enjoyed my time there. And I was pleased to have a couple potential students and people interested in my work come and search me out specifically.

Here are a few photos from the weekend. And of course I did a lot more talking than weaving, so little progress was made on the Mirrix.

 

I bought some more tools from Jim Hokett of Hokett Would Work. He makes amazing weaving tools in his workshop in Magdalena, NM. I have not used a boat shuttle for years, but he had some very tiny ones made for using that little bit of warp you want to fill at the end of your project. I never have that problem with tapestry, but I do have trouble with the warp-as-weft sections I use in my headers especially on the Mirrix. The bobbins I have the warp wound on are difficult to get through the narrow Mirrix warp. One of Jim's shuttles was perfect! And it is gorgeous.

This is Bettye Sullivan and the rugs she and her husband Alex make.

I was rather unreasonably excited about this idea. This is Margaret Sunday's flower hammer being held up by magnets. Look at all the tools you can keep track of with an idea like this. I'll be looking for those magnets. Thanks Margaret!

Bengt Erikson tapestries at Collected Works

Bengt Erikson has a show of his tapestries at Collected Works in Santa Fe. The show will be up through May. There are seven tapestries hanging.

My favorite pieces are the School House and Old Church--Finland. I love the simple lines and intriguing forms.

School House, Bengt Erikson, 57 x 47 inches, wool/cotton/linen/stainless steel

Here is a detail of the bottom section of School House. I loved how this shifting 2-warp pattern created texture but blended together from farther away.

There was a similar textural effect on the left side mid-green portion of Old Church--Finland though this time I believe it was pick and pick.

Old Church--Finland, Bengt Erikson, 50 x 45 inches, woolcotton

Detail, Old Church--Finland

15 Ambrose Street, Bengt Erikson, 50 x 47 inches, wool/cotton; Spring--Tacoma, Bengt Erikson, 46 x 38 inches, wool/linen

I enjoyed seeing Bengt's work and I recommend a stop to see it. Also look at his beautiful website at www.eriksontapestries.com. Look for Mim's Favorite hanging near the coffee bar. I didn't get a good photo of this piece, but it is a vibrant blue with trees suggested in orange-brown trunks and green tops. I was really inspired by the simplicity and beauty of Bengt's designs. I will have to return to see them again before they come down.

And if you're a local Santa Fean and you've never been to Collected Works, now is the time. It is a great independent bookstore and they even have a coffee shop.

Taos Fiber Marketplace, this Saturday!

 I will be at Taos Fiber Marketplace this Saturday from 9 am to about 4:30 pm demonstrating tapestry. (I reserve the right to leave to either go to the bathroom or get some lunch in case that is when you're looking for me!)

My new postcards arrive tomorrow.
My loom is warped and a demo piece underway.
Unfortunately the car is still filthy and the dog has to go to the kennel. But other than that, we're good to travel!

If you're in Taos this Saturday, April 20th, stop by the convention center and look me up! The website for Taos Fiber Marketplace is HERE.

If not, maybe you should come by Taos Fiber Marketplace this weekend... that is Taos, New Mexico by the way. Taos Convention Center. Check this website for details: http://www.taosfibermarketplace.com/